







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWalk-In Shower Installation in Spring Valley, NV
A walk-in shower installation in Spring Valley typically runs $4,200 to $9,800 for a full tear-out and rebuild, with most standard tub-to-shower conversions landing in the $5,500 to $7,500 range. The work involves removing the old tub or shower, addressing the waterproofing behind the walls, and rebuilding a low-curb or curbless shower that suits the room and the way you actually move through it. We’re Groundwork Construction Co. of Spring Valley, and we handle the whole job under one roof, from demo to the last bead of caulk, backed in writing by our 730-Day Done Right Promise. For a straight answer on your specific bathroom, call (888) 329-9414 and a live person picks up, day or night.
Most Spring Valley bathrooms weren’t built for the showers people want now. The valley’s housing stock runs from 1980s two-story plans off Alta Drive to newer builds east of the 215, and a lot of those tubs sit in alcoves framed for a 30-inch tub and nothing more. A walk-in shower is often the single change that makes a bathroom usable for the long haul, whether you’re dealing with a knee that doesn’t bend like it used to or you just want a bathroom that doesn’t look like a hotel from 1994. This page covers the specific work. The broader planning picture lives on our Bathroom Remodeling page, and the whole-home context is on our home page if you want to see where this fits.

When You Need Walk-In Shower Installation
Homeowners call us for a walk-in shower for a handful of reasons that come up again and again in Spring Valley. If any of these sound familiar, it’s worth a conversation.
- You’re stepping over a tub wall you no longer trust. A tub apron that’s 17 or 18 inches high is a real fall risk, especially on tile that gets slick with soap. In the Spring Valley homes we work in, this is the most common reason people finally pull the trigger.
- The tub is cracked, stained, or peeling, and refinishing won’t hold. A refinished tub over a flexing fiberglass base tends to fail within a couple of years. Once the surface is gone, replacement is usually the honest answer.
- You want a shower built for how the room actually gets used. Older alcoves force you into a fixed footprint. A rebuilt walk-in gives you a bench, a niche, a linear drain, and glass that opens the room up.
- You’re planning to age in place. A curbless or low-curb design with a wider opening and blocking for grab bars is something you install once and appreciate for years. Build it in now and it’s just good design, not a medical fixture.
- The tile or grout behind the wall has already failed. Spring Valley’s hard water and the temperature swings between summer afternoons above 100°F and cooler nights work on older shower assemblies. Crumbling grout and soft drywall behind the surround are signs the waterproofing is done.
- You’re remodeling the whole bathroom anyway. If the vanity, floor, and lighting are already on the list, folding the shower into the same job saves money and avoids tearing up a finished room twice.
Our Walk-In Shower Installation Process
Every walk-in shower we build follows the same disciplined sequence. The order matters, and skipping a step is how showers leak.
- Free estimate and design consult. We measure the room, look at the plumbing and framing, and talk through layout, tile, glass, and fixtures. You get an upfront price before any work begins, and the number you see is the number you pay. No-hassle upfront pricing, no surprises.
- Protected demo and inspection. We lay down floor protection, shut off and cap the water, and remove the old tub or shower. Once the wall is open we check the framing, the valve, and the drain. Hidden rot or a failing valve gets flagged before it costs you more later, and we quote any change in writing first.
- Framing, plumbing, and rough-in. We reframe the opening, set blocking for a bench or future grab bars, and rough in the drain, valve, and showerhead. For a curbless design this is where the floor gets recessed and the slope gets built.
- Waterproofing. This is the part nobody sees and everybody regrets skipping. We install a bonded waterproofing membrane over the walls and pan, seal the seams and corners with the manufacturer’s tape, and run a flood test before a single tile goes down.
- Tile, glass, and finish. We set the tile, install the drain cover, hang the glass, and mount the fixtures. Glass gets measured to the finished opening so the door swings clean and the seals sit tight.
- Final walkthrough. We run the shower, check for slope and drainage, walk you through care and cleaning, and hand over the job covered by our 730-Day Done Right Promise. If anything isn’t right in the next two years, we make it right.

Walk-In Shower Installation Pricing in Spring Valley
Walk-in shower installation in Spring Valley ranges from about $4,200 for a straightforward acrylic or prefab unit to $9,800 or more for a large tiled shower with a bench, niche, and frameless glass. The spread comes down to size, materials, and how much the room fights back once the wall is open. Here’s a line-item view of what drives the number.
| Scope of work | Typical range |
|---|---|
| Prefab acrylic or fiberglass walk-in unit (tub-to-shower swap) | $4,200 – $6,200 |
| Tiled shower, standard alcove, porcelain or ceramic tile | $5,500 – $7,800 |
| Large tiled shower with bench, niche, and frameless glass | $7,500 – $9,800 |
| Curbless / barrier-free conversion (includes floor recess and slope) | $8,500 – $12,000+ |
| Plumbing valve or drain relocation | $600 – $1,800 |
| Frameless glass enclosure (measured to opening) | $1,200 – $3,200 |
| Tile upgrade to large-format or natural stone | Adds $1,000 – $3,500 |
A few things move the price more than people expect. Curbless designs cost more because the floor has to be recessed and sloped correctly, which is real carpentry, not just tile work. Glass is priced by the square foot and the hardware, so a big panel with a fixed transom costs more than a simple door. And large-format tile costs more to set well, not because the tile is expensive but because it takes more care to get flat. The Bathroom Remodeling in Spring Valley page covers how a shower fits into a full bathroom budget.
We pair that pricing with 0% financing for 18 months and $1,000 off projects over $10,000, which takes some of the sting out of a job this size. Every estimate is free, and it’s built from real measurements, not a phone guess. Trusted partners like Kohler fixtures and quality tile suppliers feed into the design so you’re choosing on merit, not just what’s on the shelf. Built to last, backed in writing.
Walk-In Shower Installation FAQs
How much does a walk-in shower installation cost in Spring Valley?
A walk-in shower in Spring Valley typically costs $4,200 to $9,800, with a standard tiled tub-to-shower conversion averaging around $5,500 to $7,500. Curbless conversions and large tiled showers with frameless glass push toward the top of that range and beyond, while a prefab acrylic unit keeps things on the lower end. The exact number depends on the size of your shower, the tile you choose, and whether plumbing has to move. Call (888) 329-9414 for an exact quote, and the estimate is free.
Can you replace a tub with a walk-in shower in the same footprint?
Yes, and most of the conversions we do in Spring Valley stay inside the existing alcove. The drain usually stays put, which keeps the plumbing cost down, and the opening gets reframed for a low-curb entry. The only surprises tend to be a valve that’s past its prime or framing that’s taken on water, and we quote any of that in writing before we touch it. Call for a free estimate and we’ll tell you what your specific alcove can take.
Is it cheaper to repair my existing shower or replace it with a walk-in?
Repair is cheaper in the short term, but only if the structure behind the tile is still sound. Once the waterproofing has failed and the substrate is soft, patching a shower usually means redoing it again within a couple of years, so replacement comes out ahead. A quick look behind the wall tells us which path is honest. We’ll give you the straight answer, and if a repair genuinely makes sense, we’ll say so. Call (888) 329-9414 to sort it out.
How long does a walk-in shower installation take?
Most walk-in shower installations in Spring Valley are done in 5 to 10 working days, depending on size, tile, and glass lead time. A prefab swap can finish faster; a curbless tiled build with custom glass can run longer because the waterproofing needs to cure and the glass has to be measured after the tile is set. We don’t cut corners on the waterproofing to save a day, since that’s what keeps the shower dry for years. Call us for a schedule built around your job.
If you’ve been putting off that bathroom because the tub is getting harder to step over, this is the year to handle it. We handle walk-in shower installation across Spring Valley from the first measurement to the final walkthrough, with a live person answering the phone 24/7, upfront pricing that doesn’t move, and a 730-Day Done Right Promise backing the work. Call (888) 329-9414 today for a free estimate and design consult, and let’s get your shower built right.
Written by the team at Groundwork Construction Co. of Spring Valley, serving Spring Valley.


