







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Spring Valley, NV: What the Job Actually Involves
Cabinets & countertops in Spring Valley typically run $14,000 – $45,000 for a full package, with most single-room projects landing in the middle of that band. You’re looking at two to four weeks of working time once materials arrive, and a few weeks before that for templating, ordering, and HOA or architectural review if your community requires it. Call (888) 329-9414 and we’ll walk your kitchen, measure the layout, and put a written line-item number in front of you. No guessing, no vague ballparks.
How We Run a Cabinet and Countertop Project, Stage by Stage

Most contractors gloss over the schedule. You deserve to know exactly what happens between the first walkthrough and the day you can cook again. Here’s the sequence we follow on a Spring Valley job.
Stage 1: Measure and design lock (day 1, about 90 minutes on site). We measure every wall, check for out-of-square corners, and note where the existing plumbing and electrical sit behind the current cabinets. This is where you decide the door style, finish, and countertop material. Nothing gets ordered until you sign off on a layout drawing, because changing a cabinet box after it’s built is expensive and slow.
Stage 2: HOA and architectural review (week 1 – 2, varies by community). If your subdivision has an architectural review board, we prepare the submittal package: door style samples, finish chips, and a short scope write-up that matches the community’s approved palette. Many gated master-plan communities in Spring Valley restrict replacement door profiles and exterior-facing finishes. We handle this paperwork before anything ships, so you’re not stuck with a delivery you can’t install.
Stage 3: Order and templating (week 2 – 5). Cabinets go into production. For stone counters, a laser template happens only after the cabinet boxes are set and leveled, never before. This is the single biggest scheduling mistake we see from other crews: they template off a drawing, then the slab doesn’t fit because the wall was 3/8 inch out of plumb.
Stage 4: Demo and cabinet set (2 – 4 days). We pull the old cabinets, cap or reroute utilities as scoped, patch and level the wall and floor, then set and shim the new boxes. Doors and drawer fronts go on but stay off the hinges until counters are in, so nothing gets scratched during the counter lift.
Stage 5: Countertop install, backsplash tie-in, and punch (1 – 2 days plus cure). The slab or quartz goes down, seams get epoxied, and the sink and faucet get set. You walk the job with us before we call it done. Any punch item gets logged and handled. That final walkthrough is also when we hand over your 730-Day Done Right Promise in writing. If something fails, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Two decisions drive most of the cost and all of the look: the cabinet box and the counter surface. Here’s the honest trade-off on each.
- Stock cabinets: fast to order, $4,000 – $7,000 for a typical Spring Valley kitchen, but limited sizes mean filler strips and a less custom fit. Fine for a rental or a tight budget.
- Semi-custom (KraftMaid range): the sweet spot for most homeowners. Adjustable sizing, real plywood boxes, and finishes that hold up to desert UV through a window. Roughly $7,000 – $13,000.
- Full custom: built to the inch, priced accordingly. Worth it when you’re fitting an odd wall or a specific appliance run.
- Quartz: non-porous, no sealing, siblings well in dry desert air. Mid to high end on cost.
- Granite: natural variation, heat-tolerant, but needs periodic sealing in a dry climate.
- Laminate or butcher block: the budget end, and honestly fine for a secondary space. Butcher block needs oiling; laminate can delaminate near a hot cooktop.
- Under-mount sink and faucet: a solid under-mount in stainless or a fireclay basin paired with a quality faucet upgrades the whole feel. Brands like American Standard and Sterling make dependable mid-tier fixtures; a Toto or a premium brand is worth it if you cook hard.
What Cabinets & Countertops Cost in Spring Valley, NV

Kitchen cabinets and countertops in Spring Valley run $14,000 – $45,000 as a combined package. Cabinet installation alone lands at $4,000 – $13,000; countertop installation adds $2,000 – $6,500; a kitchen island pushes the number up another $3,000 – $10,000. Backsplash usually runs $800 – $2,500 if you tie it into the same job. Here’s what moves a project to the low or high end of that range:
- Size and layout. A galley kitchen is fewer boxes and fewer linear feet of slab than an L-shape with an island.
- Existing condition. Out-of-square walls, water-damaged subfloor, or a dated electrical panel that has to be brought up to code before we set cabinets.
- Relocating plumbing or electrical. Moving a sink or a range circuit adds cost and may require a permit.
- Material grade. Semi-custom boxes and quartz sit mid-range; full custom and book-matched stone sit at the top.
- Permit scope. A like-for-like swap may not need one. Relocating gas or plumbing, or changing the structural layout, does.
A written estimate from us lists cabinets, counters, labor, demo, disposal, and permits line by line. What it typically won’t include: appliance purchase, structural framing changes, or unforeseen drywall rot behind the old cabinets. We flag those on site before we quote, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Spring Valley Homes Specifically Do to This Job
Most of the housing stock here is 1990s – 2000s stucco-and-tile tract homes in gated master-plan subdivisions, and that build era shapes the work. These kitchens were framed and built at the edge of the Mojave on expansive desert soils, where the extreme swing from 110°F summers to near-freezing winter nights works on every wall and slab in the house. We regularly open up a cabinet run near Rhodes Ranch and find the wall a half-inch out of plumb, because the slab has moved and the framing followed it. That’s why we template counters only after boxes are set and leveled, never off a drawing. On the western slopes of Spring Valley, the soil movement is more pronounced than on the flatter ground in central Las Vegas, so a level cabinet install here takes more shimming and more patience.
The other local reality is HOA. Many of the gated communities in Spring Valley have architectural review boards with approved door profiles and finish palettes, and a replacement kitchen order that ignores those rules can trigger a violation notice. We pull the community’s standards first, choose a door style that clears review, and document the submittal so you have a paper trail. If your project grows into a wider kitchen renovation, that scope lives on our Kitchen Remodeling in Spring Valley page. Homeowners often pair this work with a Garage Conversion ADU in Spring Valley or a New Detached ADU in Spring Valley when they’re adding living space at the same time, and we coordinate those trades so the timelines line up. Everything we do in Spring Valley runs through the same team, and our Kitchen Remodeling service handles the broader build when you want it.
Serving Spring Valley, NV – Our Local Coverage Area
We serve Spring Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Spring Valley

Plan on two to four weeks of active work, with the ordering and template phase adding a few weeks before install starts. The bulk of that lead time is cabinet production and stone templating, not labor on site. Call (888) 329-9414 and we’ll map your timeline against the current production calendar.
A like-for-like swap usually doesn’t need one; moving plumbing, gas, or electrical, or changing the layout, does. We tell you which category your job falls into during the on-site estimate, and if a permit is required, we pull it and get the inspection passed. That’s part of a written scope, not an afterthought.
Yes, and most Spring Valley jobs we do stay exactly where the appliances and sink sit. Keeping the layout means the sink and range connections don’t move, the permit scope stays simple, and the project finishes faster. If you want to relocate the sink or add an island, we’ll price that separately so you can see the real cost of the change.
The combined package runs $14,000 – $45,000, with cabinets at $4,000 – $13,000 and counters at $2,000 – $6,500 on their own. Material grade, layout size, and whether utilities move are the biggest drivers. Call (888) 329-9414 for an exact quote; the estimate is free and itemized.
Every installation we do is covered by our 730-Day Done Right Promise. If the workmanship fails within two years, we make it right at no extra cost, and that protection goes with the job in writing. Manufacturer warranties on the cabinets and stone are separate and pass through to you.
Get a Free Cabinets & Countertops Estimate in Spring Valley
Call (888) 329-9414 to schedule your free on-site estimate for cabinets and countertops in Spring Valley. We’ll measure the space, walk you through door style and surface options, and hand you a written line-item quote with a fixed price. A live person answers the phone any hour, any day. Ask about 0% financing for 18 months and the $1,000 off projects over $10,000. Then you can decide with the real numbers in front of you.
Written by the team at Groundwork Construction Co.












