







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Enterprise, NV: What It Involves and What It Costs
Door installation in Enterprise, NV typically runs $450 to $1,800 per door installed, with most single-door replacements landing in the $650 to $1,100 range once trim, hardware, and finish work are included. A standard interior door swap takes a few hours; an exterior entry door or a set of French doors runs a full day or two, and custom carriage-house or oversized wood doors can stretch to three days with finish curing. Call (888) 329-9414 and we’ll walk you through what your specific door needs before anyone swings a hammer.
How a Door Installation Actually Runs, Start to Finish

Every door job has a rhythm. Here’s the honest sequence, with the durations we plan for on Enterprise homes.
Day 1 morning – measure and confirm. We pull exact rough-opening dimensions, check the wall for plumb and square, and confirm the swing direction and handing. This is when you lock in the final decision on slab thickness, jamb material, and hardware finish. On new-build Enterprise homes along the 89139 corridor, walls are usually straight because the framing is recent; on custom homes we sometimes find a header that needs shimming. That gets flagged here, not mid-install.
Day 1 midday – demo and prep. The old door, casing, and threshold come out. We inspect the framing and sill for water intrusion or settling, then prep the opening. Interior doors: two to three hours. Exterior doors: four to five, because we’re sealing and flashing the rough opening correctly before anything goes back in. You decide here whether to replace the casing or keep it.
Day 1 afternoon to Day 2 – set and shim. The new door goes in plumb, level, and square, shimmed at the hinge and strike points. We check the gap around all four sides; anything more than 1/8 inch out of tolerance shows up as a draft or a rub. This stage takes two to four hours per door. For a multi-door project, we batch the setting and shim the whole run before moving to trim.
Day 2 – hardware and trim. Hinges, lockset or handleset, deadbolt, and any smart-lock integration go in. Casing and threshold get installed and caulked. Whisper-quiet and smart-home-integrated openers on sliding or pocket configurations get wired and tested here. Add two to three hours.
Day 2 to Day 3 – finish and final walkthrough. Paint or stain touch-up, weatherstripping check, and a full open-close-latch test on every door. We hand you the punch list and fix anything before we leave. Stain-grade or carriage-house doors that need a finish coat get a curing window you’ll want to plan around.
Plan on one to three days per door depending on type and finish. A whole-house interior package of six to eight doors typically books two to four working days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions that affect both price and how the door performs for the next twenty years happen before install day. Here’s what Enterprise buyers weigh.
- Interior: hollow-core vs. solid-core. Hollow-core runs $150 to $400 installed and suits closets and low-traffic rooms. Solid-core costs $300 to $700 and cuts sound transfer noticeably, which matters in open-plan homes. Solid wood is the top of the range and the better match for custom finishes.
- Exterior: fiberglass vs. steel vs. wood. Fiberglass handles desert heat and sun without warping and takes a stain or paint finish well. Steel is the budget choice but dents and can radiate heat. Wood is the premium pick for carriage-house and custom looks, with the trade-off of annual maintenance in 100°F-plus summers.
- Carriage-house and custom wood doors. These are the doors Enterprise custom homes tend to want – arched tops, multi-panel designs, hand-finished stains. They cost more ($1,200 to $4,000-plus per door) and demand precision in the rough opening, because there’s no hiding a bad fit behind a plain slab.
- Whisper-quiet and smart integration. Soft-close hinges, sound-dampening seals, and smart locks that tie into a home system all add cost but eliminate the slam and the fumbled key. Worth it on primary suites and entries.
- Pocket, barn, and sliding configurations. These need the right track and header support. They read beautifully in modern Enterprise interiors but require planning before drywall closes.
If you’re working on a broader exterior scope, this often pairs naturally with the rest of our Windows & Doors work, and many homeowners pair this with Cabinets & Countertops in Enterprise when a kitchen or mudroom is part of the same push.
What Door Installation Costs in Enterprise, NV

Door installation in Enterprise runs $450 to $1,800 per door, with most jobs landing between $650 and $1,100. Here’s what moves the number toward the low or high end.
| Item | Typical Range |
|---|---|
| Interior door (hollow-core), installed | $450 – $700 |
| Interior door (solid-core), installed | $650 – $1,100 |
| Exterior entry door, installed | $900 – $1,800 |
| Carriage-house / custom wood door, installed | $1,200 – $4,000+ |
| Hardware / smart-lock upgrade | $150 – $600 |
Five variables push a job from the low end to the high end: (1) door size and weight – oversized or custom slabs need a second set of hands and a longer set time; (2) existing opening condition – a wall that’s out of plumb adds shimming and trim labor; (3) material grade – solid wood and carriage-house designs cost more in both product and finish time; (4) hardware and smart integration – every lock, handle, or opener adds wiring and testing; (5) permit scope – a single interior swap usually needs none, while exterior openings and structural changes may require one.
A written estimate includes labor, demo, disposal, shimming, caulking, and standard hardware. It typically does not include custom finish curing time, structural reframing if the opening is compromised, or specialty hardware you source separately. The number you see is the number you pay – no change orders hiding in the fine print.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Homes Specifically Do to This Job
Enterprise isn’t an old-core retrofit market. It’s Las Vegas’s fast-growing southern-edge suburb, and most of the doors we set go into 1990s-to-2020s tract homes and master-planned builds, plus the continuing custom construction pushing toward the McCullough Range foothills. That changes the job in specific ways. Because construction here is greenfield desert development on raw Mojave land, we’re often coordinating door installation with site prep, grading, and utility trenching rather than tearing out decades-old casing. The housing stock is young enough that framing is usually true and openings are plumb, which shortens prep time on interior doors.
Two local factors still bite. First, sustained 100°F-plus summers mean exterior doors take a beating on the sun-facing side; we see finish failures and weatherstripping breakdown faster here than in milder climates, so seal and finish quality matters more. Second, HOA rules in the newer Enterprise master-planned communities often dictate door color, hardware finish, and even the style of the entry door. We check those requirements before you buy a slab you can’t hang. The other thing contractors from softer-soil markets don’t budget for is caliche – that rock-hard calcium-carbonate layer just under the surface – which affects exterior door thresholds and any footing work around a new opening.
If a new door is part of a bigger project, it often fits into a full Windows & Doors in Enterprise scope. And for homeowners converting or adding space, it frequently pairs with a Garage Conversion ADU in Enterprise where interior door counts climb fast.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Enterprise

A single interior door takes two to four hours; an exterior entry door or a French-door set takes a full day, and custom wood or carriage-house doors can run two to three days with finish curing. Whole-house packages of six to eight doors usually book two to four working days. Call (888) 329-9414 for a timeline specific to your job.
Most single interior door swaps don’t require a permit, but exterior openings, structural header changes, and resizing an opening typically do. We confirm the requirement during the estimate so there are no surprises. Call (888) 329-9414 and we’ll tell you exactly what your project needs.
In most cases, yes – a same-size door swap requires no plumbing or structural work. The complication comes when you change the opening size, which can mean moving a header or reframing. We flag that during measurement, not mid-install. Call (888) 329-9414 for a free on-site check.
Most single-door installs run $450 to $1,800, with typical jobs landing between $650 and $1,100. Complexes with custom wood, smart hardware, or a compromised opening climb higher. Call (888) 329-9414 for an exact quote – estimates are free.
Every door installation we do is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That’s backed in writing, not a handshake. Call (888) 329-9414 to schedule your free estimate.
Get a Free Door Installation Estimate in Enterprise
If you’re ready to price a door installation in Enterprise, call (888) 329-9414. A live person answers around the clock, every day. We’ll ask what doors you’re replacing or adding, talk through your options, and set up a free on-site estimate with a written, line-item quote. Calls are answered 24/7, technicians arrive background-checked and in uniform, and pricing is upfront – no surprises. We cover Enterprise and the surrounding communities, and we’re happy to look at a single door or a whole-house package.
Written by the team at Groundwork Construction Co.












