







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Paradise, NV: What the Job Actually Involves
Most paver driveways in Paradise, NV run $7,000 to $18,000 and take three to five working days once we start setting base and laying units. The job is a full excavation and rebuild: tear out the old surface, haul off the debris, grade and compact a structural base, then install the pavers on top. To price your specific driveway, call (888) 329-9414 and we’ll set up a free on-site estimate with a written line-item quote.
Key Takeaways
- Paver driveway installation in Paradise typically lands between $7,000 and $18,000 depending on square footage, base depth and paver grade.
- Plan on three to five working days of crew time, plus a day or two before that for demo and haul-off on a bigger tear-out.
- Clay County permitting and resort-corridor review apply to many properties here, so we pull the permits and stand the inspection.
- Every install is backed by our 730-Day Done Right Promise.
How We Build a Paver Driveway, Stage by Stage

A driveway is mostly what you can’t see. The pavers are the finish; the base is the driveway. Here’s the real sequence, with the decisions you make along the way.
Stage 1: Site walk and layout (about an hour, before work starts)
We measure the drive, check where it meets the street and garage apron, and confirm the slope so water drains away from the slab, not toward it. You decide the paver style, color and layout pattern at this point. This is also when we flag anything underneath, like sprinkler lines or a soft spot where the old surface had been sinking.
Stage 2: Demolition and haul-off (one to two days)
We break out and remove the existing concrete, asphalt or old pavers and load it out. On the tight lots common around Paradise Palms, that means planning where the dumpster sits and keeping the street clear. You don’t decide much here, but this is when we discover how thick the original slab was and whether the subgrade needs correction.
Stage 3: Excavation, grading and base compaction (one to two days)
We excavate to depth, shape the grade and build up the crushed aggregate base in lifts, compacting each one. Base depth depends on how much load the drive carries. A standard residential drive takes a shallower base; deeper cuts go in where heavier vehicles park. You decide whether you want a widening, a turnaround or a second parking pad added, since that has to be photographed before the base goes down.
Stage 4: Edge restraint and paver setting (one to two days)
We set the edge restraint, lay the bedding sand, then set the pavers in your chosen pattern and cut the borders and any curves by hand. This is the visible progress day. You walk the layout before we move to the last step.
Stage 5: Compaction, joint sand and final walkthrough (half a day)
We compact the field, sweep polymeric joint sand into the joints, compact again and clean up. Then we walk the finished driveway with you, hand over care instructions, and document the job against the 730-Day Done Right Promise. If anything shifts or settles, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The pavers themselves are the biggest call. Here’s what actually changes the number and the look:
- Concrete pavers (standard grade): The workhorse choice for a Paradise driveway and the most common. Durable, easy to repair one unit at a time, and typically $7,000 to $18,000 installed on a residential drive. Belgard and Tremron make the ranges most of our clients pick from.
- Premium interlocking pavers: Denser units, tighter tolerances and richer color blends. You pay more per square foot but get a crisper, more uniform finished surface. Good where curb appeal is a priority. Techo-Bloc and Unilock are worth a look in this tier.
- Permeable pavers: Open-joint or slotted systems that let water drain through instead of running off. Worth the upcharge on a low-lying lot that holds water after a monsoon, since you’re solving a drainage problem and a paving problem at once.
- Pattern and border: A running-bond field is the most economical. A herringbone field takes more cuts and slightly more labor. A contrasting border band adds material and cutting time, but it’s the detail that separates a good driveway from a plain one.
- Base and drainage details: A drainage channel, a catch basin or a deeper base where the subgrade is soft all add cost. Skipping them on a bad lot is how driveways fail early.
We bring samples and a written line-item quote, so you’re comparing real options, not guessing from a brochure.
What Paver Driveways Cost in Paradise, NV

Plan on $7,000 to $18,000 for a full paver driveway installation in Paradise, NV. That range covers the typical single-family drive, from demo through joint sand and cleanup. Here’s what pushes a job to the low vs high end:
- Square footage: The single biggest factor. A short two-car drive prices near the bottom; a long drive, a turnaround or a third bay pushes toward the top.
- Existing surface and tear-out: Thick old concrete is slower to break out and costs more to haul. A drive that’s already pavers or gravel comes out cheaper.
- Base depth and subgrade: Soft, poorly compacted ground needs correction before pavers go down. A deeper base costs more up front and saves you a repair later.
- Paver grade and pattern: Standard-grade units in a running-bond field sit at the low end. Premium interlocking pavers, complex patterns and border details move the number up.
- Drainage and permit scope: A drainage channel or catch basin adds cost. So does any permit or resort-corridor review your property requires, which we identify up front.
Every estimate is written line-item style, so you see the demo, the base, the pavers and the drainage as separate lines, with no bundle hiding a markup. Pricing is upfront. The number you see is the number you pay, and if the scope genuinely changes we tell you before we proceed, never after. We also offer 0% financing for 18 months and $1,000 off projects over $10,000 to make a full install easier to manage.
See the difference
Before
After
Before
After
Before
AfterWhat Paradise Homes Specifically Do to This Job
Paradise is the unincorporated urban core around the Strip, and that shapes how a paver driveway gets built here. A lot of the housing stock is mid-century to 1990s, and the ranch homes in enclaves like Paradise Palms often still have their original flat roofs and aged electrical. Those older properties tend to have driveways that have settled, cracked or drained toward the house for decades, so we spend more of the budget correcting grading and base than we would on a newer lot. The other local wrinkle is permitting. Construction around the Strip corridor moves through Clark County building permits and, on some projects, resort-corridor design review that doesn’t apply in Henderson or North Las Vegas. For a residential driveway we confirm the scope and pull what’s required. The summer heat is its own factor. With highs above 110°F, our crew works paver setting in early-morning windows, and we schedule base compaction so it’s done before the afternoon sun bakes the sand. We watch the monsoon forecasts too, because a flash flood or a downpour on a half-finished base means covering and re-grading before we lay another unit.
If you’re already planning other work on the property, homeowners often pair a new driveway with Door Installation in Paradise or a Cabinets & Countertops in Paradise upgrade on the interior side. Every bit of it is covered by our 730-Day Done Right Promise, and our technicians are background-checked and arrive in uniform.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Paradise

Most paver driveways in Paradise take three to five working days of crew time, with demo and haul-off usually adding one to two days on a bigger tear-out. Rain or a heat advisory can push the schedule, so we build weather days into the plan and tell you what’s realistic.
A pavers-only replacement usually doesn’t require a building permit, but any structural work, drainage tie-in or work in the resort corridor may need Clark County review. We confirm what your property requires up front, pull what’s needed and stand the inspection so it’s handled from our side.
We don’t recommend it, and we won’t do it on a driveway that’s cracked or has a failing base. A paver driveway needs a proper compacted base underneath; skipping the tear-out just means the pavers settle and crack within a couple of seasons. Do it once, correctly.
A full install typically runs $7,000 to $18,000, depending on size, existing condition, base depth, drainage and paver grade. Call (888) 329-9414 for an exact quote; estimates are free and the written line-item pricing is upfront.
Every install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something we installed isn’t right, we make it right, in writing, for two full years.
Get a Free Paver Driveway Estimate in Paradise
If your Paradise driveway is settled, cracked or worn, the fix starts with a real number. Call (888) 329-9414 for a free on-site estimate and a written line-item quote on paver driveways. A live person answers, 24/7 – not a voicemail. We’ll measure the drive, confirm the base and drainage conditions, walk you through the options and give you transparent, upfront pricing. For the wider scope of what we handle around the property, see our Driveway & Pavers service or the full Driveway & Pavers in Paradise page, and find more of what we cover for Paradise.
Written by the team at Groundwork Construction Co.












