







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Sunrise Manor, NV: What It Takes and What It Costs
Door installation in Sunrise Manor typically takes one to two days for an exterior door and runs $650 to $2,400 installed, depending on door type, frame condition, and whether the opening needs repair. Heavy shop and oversized doors on acreage properties here push toward the high end because they need heavier hinges, reinforced frames, and openers rated for the weight. Call (888) 329-9414 for a free on-site estimate before anything gets ordered.
How We Install a Door in Sunrise Manor, Stage by Stage

Door work on Sunrise Manor homes is rarely just a swap. We plan for two days on most exterior jobs and a single visit on interior doors, and we tell you which one you’re getting before we start.
Day one, first hour: measure and open the wall. We pull the old door and check the rough opening, the sill, and the framing behind the trim. On the 1960s and 1970s stucco-on-frame houses along the Charleston and Nellis corridors, we often find rot at the sill plate or a header that’s moved. You decide right there whether we repair the framing or reset the opening. Neither surprises you, because the estimate already listed what repair would cost.
Mid-morning day one: prep and flashing. We square the opening, install new sill pan and flashing, and seal the rough opening. This is the step most quick installs skip and the reason doors leak in monsoon season. It takes about two hours and it’s not optional on an exterior door.
Day one afternoon: set and shim the door. The door goes in plumb and level, shimmed at the hinges and strike, checked for a consistent gap all the way around. On heavy shop doors and oversized openings, we reinforce the jamb before hanging because a door that weight will pull an unreinforced frame out of square within a season.
Day two morning: hardware, sealant, and openers. We install locks, handles, closers, and on garage or shop doors, mount the opener rated for the door’s weight. You decide hardware finish and whether you want a keypad or smart lock at this stage. Sealing the exterior with backer rod and elastomeric caulk comes next.
Final walk: swing test and sign-off. We open and close the door a dozen times, check the weatherstrip seal, run the opener through a full cycle, and walk the finished work with you. If it doesn’t feel right, we adjust before we leave, and the work is covered by the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Door Options You’ll Choose Between
Most Sunrise Manor homeowners end up picking from a handful of real choices. Here’s the honest trade-off on each.
- Steel entry doors: $650 to $1,500 installed. Strong, secure, and holds up to desert sun, but dents take a filler and repaint. Good fit for a front door that takes a beating.
- Fiberglass entry doors: $900 to $2,200 installed. Won’t dent or rust, holds color longer in 105°F summers, and can be stained to look like wood. The best balance of durability and price for most homes in 89110.
- Solid wood or wood-core doors: $1,200 to $2,800 installed. Beautiful and heavy, but they need refinishing every few years in this climate and can warp if the seal fails.
- Heavy-duty shop and oversized doors: $1,800 to $4,500 installed. Built for detached workshops and outbuildings, with reinforced frames, industrial hinges, and openers rated for the door weight. Worth every dollar on an acreage property where the door works daily.
- Impact-rated and insulated doors: add $400 to $1,200 over standard. Sells itself in wind-driven dust and monsoon season, and quiets the street noise.
Sliding and patio doors are their own job and get covered on our Windows & Doors in Sunrise Manor page, as does the wider project scope if you’re replacing several openings at once.
What Door Installation Costs in Sunrise Manor, NV

Plan on $650 to $2,400 for a standard exterior door installed, and $1,800 to $4,500 for a heavy-duty shop or oversized door. Interior doors run $300 to $800 each. Here’s what pushes a job toward the low or high end.
- Door type and weight: a hollow-core interior door sits at the bottom; a solid steel or oversized shop door with an opener sits at the top.
- Frame and sill condition: clean framing saves money. Rot at the sill or a header that’s moved adds $150 to $900 for repair.
- Opening size: a non-standard width or height means a custom door or a rebuilt rough opening, both of which add cost.
- Relocating anything: moving a light switch, adding an outlet for a powered opener, or shifting structure to widen an opening adds labor and, in some cases, permit scope.
- Hardware and finish: basic knob and deadbolt versus smart lock, keypad, or a powder-coated finish on a shop door.
A written estimate from us lists the door, hardware, framing repair allowance, permit fees where needed, and labor as line items. What typically isn’t included: drywall patching and repainting around the interior trim, which we quote separately if you want it done. The number on the estimate is the number you pay; no change orders for work already listed. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
See the difference
Before
After
Before
After
Before
AfterWhat Sunrise Manor Homes Specifically Do to a Door Installation
Sunrise Manor is mostly built-out, older unincorporated Clark County tract housing, much of it 1960s to 1980s stucco-on-frame sprawl along the 89110 corridor near Charleston and Nellis. That means we’re almost always working on an aging home, not a new one, and doors show it. Because the area is unincorporated, permits can run through Clark County rather than the City of Las Vegas, a paperwork quirk that trips up contractors who don’t work the east side. We pull the right permit and pass inspection the first time.
On the older tracts, carports and garages converted to living space without permits are common, so a door installation sometimes runs into unpermitted framing that has to be brought up to code before we can hang a new door in it. Original single-pane door glass and aging thresholds are also the norm, and the intense Mojave heat bakes vinyl seals and weatherstrip until they fail. If the project folds into a larger conversion, homeowners often pair this with a Garage Conversion ADU in Sunrise Manor, where the door and the framing get planned together.
Serving Sunrise Manor, NV – Our Local Coverage Area
We serve Sunrise Manor and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Sunrise Manor

An exterior door takes one to two days; an interior door takes a few hours; a heavy shop door with an opener runs two to three days. Call (888) 329-9414 for a firm timeline on your specific opening.
A straight door replacement usually doesn’t need one, but a new opening, a widened opening, or a door tied into a converted space often does, and unincorporated Sunrise Manor permitting can run through Clark County. We tell you on the estimate whether your job needs a permit and handle the paperwork if it does.
Usually yes. A same-size replacement leaves plumbing and structure untouched. Only a widened or relocated opening touches framing, and we flag that cost up front rather than finding it mid-job.
Heavy-duty shop and oversized doors run $1,800 to $4,500 installed, with the opener often adding $400 to $900. Reinforced frames and industrial hinges are part of the number, not an add-on. Call (888) 329-9414 for an exact quote; estimates are free.
Every door we install is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If it’s not done right, we make it right.
Get a Free Door Installation Estimate in Sunrise Manor
If you have a door that sticks, leaks, or needs replacing, start with a free on-site estimate. We measure the opening, check the framing, and hand you a written line-item quote with the door, hardware, and labor spelled out. Call (888) 329-9414 and a live person answers, day or night, to book the visit. You’ll know the number before you commit to anything.
Written by the team at Groundwork Construction Co.












