







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Enterprise, NV: What It Costs and How Long It Takes
A chain link fence in Enterprise, NV usually runs $3,500 to $9,000, depending on lot size, height, and how much caliche has to be dug out to set posts. Most residential runs are finished in two to four working days once materials land on site. Call (888) 329-9414 and we’ll put an exact number on your property with a free on-site estimate, itemized in writing before a single post goes in the ground.
How we run a chain link fence job, start to finish

Every job follows the same five stages. Here’s what actually happens, and what you’ll be deciding at each one.
Stage 1: On-site measure and layout (day 1, about 1 – 2 hours). We walk the property line with you, confirm where the fence goes, and check for buried irrigation, gas lines, or utility easements that change the route. You decide the boundary and gate placement here. Any surprises get priced now, not after digging starts.
Stage 2: Utility locate and permit check (day 1 to 3). We call for the 811 utility locate and confirm whether your fence height and placement trigger a permit in Enterprise. Most residential runs under six feet on a standard lot don’t, but corner lots and anything near a drainage easement get a closer look. You’ll get a straight answer on whether a permit applies before we start.
Stage 3: Post excavation and set (day 2 to 3). This is where Enterprise bites back. Under much of the 89139 corridor, caliche sits just below the surface, so crews use a rock bar or small excavator to break through before setting posts in concrete. Holes are dug to depth, posts set and plumbed, concrete poured. Posts cure overnight before any tension is applied.
Stage 4: Rails, mesh, and tension (day 3 to 4). Top rail and terminal posts go up, then the mesh gets stretched and tensioned. You’ll choose gate swing direction and latch style at this stage so hardware matches what you actually use daily.
Stage 5: Walkthrough and cleanup. We tension-check the top rail, test both gates, walk the line with you, and haul off debris. Any issue gets corrected before we leave, and the work is backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The chain link choices you’ll actually weigh
The job is simple; the spec isn’t. Here’s what moves the result and where the honest trade-offs sit.
- Height: 4, 5, or 6 feet. Four-foot keeps cost down on a side-yard divider. Five-foot is the sweet spot for most residential lots. Six-foot gives you privacy-screen mounting options and works better on corner lots facing the street.
- Gauge and coating: galvanized vs. vinyl-coated. Standard galvanized holds up fine in dry desert air. Vinyl-coated runs more but stops the sun-warmed metal from conducting heat into a screen, and it holds color where galvanized will dull to gray.
- Mesh and rail gauge. Lighter gauge saves money on a temporary run; heavier gauge and a heavier top rail are the better call on a boundary line you plan to keep. The material spec costs more up front and lasts longer.
- Gates: single swing, double drive, or self-closing. A double drive gate clears a vehicle; a self-closing pedestrian gate is worth the small add if kids or pets use it daily.
- Privacy slats or windscreen add-ons. These attach after install and cost extra. Slats block sightlines but also block our desert monsoon drainage through the mesh, which matters on sloped lots near the foothills.
What a Chain Link Fence costs in Enterprise, NV

Plan on $3,500 to $9,000 for a residential chain link fence in Enterprise. That range reflects real jobs on real lots here, not a national average. A small side-yard run at the low end and a full-perimeter six-footer with a double drive gate and privacy slats at the top end.
Four variables move the number most:
- Linear footage and lot shape. A plain rectangle is cheaper per foot than an irregular lot with corners, jogs, and returns.
- Caliche depth. A shallow caliche layer that breaks easily adds little; a thick, hardpan layer that needs mechanical excavation and over-excavated footings adds real labor. This is the single most Enterprise-specific cost driver.
- Material grade. Heavier gauge and vinyl coating sit at the high end; lighter galvanized at the low end.
- Gates and hardware. Each gate adds cost, and a double drive gate or self-closing hardware adds more.
- Permit scope. Any permit or corner-lot variance pushes the price up and adds a week or two to the schedule.
Your written estimate itemizes posts, rails, mesh, concrete, gates, labor, and permit fees as separate lines. No change orders after the fact. What typically isn’t included: tree removal, site grading, and utility work beyond the locate, which we’ll flag up front if your job needs it.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise lots do to a chain link job
Enterprise is Las Vegas’s fast-growing southern edge, and most of the fence work here goes onto raw desert ground along the 89139 corridor rather than replacing an old fence on an established block. That changes the job. The ground hasn’t been repeatedly dug and turned, so caliche sits closer to the surface and posts need real excavation rather than a spade and a shallow hole. Crews from wetter markets budget for a soft dig and then lose a day to the rock layer.
New-build tract and custom homes also come with their own realities: HOA architectural review on many master-planned streets decides fence height and color before install, and corner lots or runs along a drainage easement often need a permit the lot next door didn’t. We check both before the first post goes in. You’ll see us on side yards facing the McCullough Range foothills more than anywhere else, where the sloping ground means posts set to graded depth and a fence line that follows the slope instead of a level top rail. Summer heat means early-morning pours; monsoon weeks mean checking drainage before we tension a line.
Common Enterprise scenarios we walk into
Most calls here fall into a handful of patterns: a new build in a tract subdivision needing a perimeter run before the backyard is usable, a homeowner in a custom home wanting a matching chain link service-yard enclosure, a corner-lot owner who needs to confirm the HOA and permit rules before buying materials, and a homeowner whose previous contractor underestimated the caliche and walked. Each of those gets a different estimate. If your project runs bigger than a fence, chain link often goes in as part of a full Fence Installation in Enterprise plan, and many homeowners pair a new fence with ADU Site Prep & Utilities in Enterprise when a backyard unit is going in, or with Door Installation in Enterprise when a new gate and entry don’t line up. Our Fence Installation service covers the wider scope, and we work the whole Enterprise area, 89139 included.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Chain Link Fence in Enterprise
Most residential chain link fences in Enterprise are finished in two to four working days from the day materials arrive, with posts curing overnight before tension. A large perimeter with caliche digging and multiple gates can push to a week. Call (888) 329-9414 for a timeline tied to your lot.
Often not, but it depends on height, lot type, and whether the line runs along a drainage easement or corner. We confirm the permit picture before install starts and flag anything that needs one. Call (888) 329-9414 and we’ll tell you where your property stands.
Yes. We route the fence around irrigation and call for a utility locate first, so buried lines get marked before digging. In practice, chain link is one of the least disruptive fence jobs you can have done. Call (888) 329-9414 to set up the walk-through.
Plan on $3,500 to $9,000 for a typical residential run, with caliche depth and gate count driving the difference. Call (888) 329-9414 for an exact quote, itemized in writing, with a free on-site estimate.
Workmanship is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Material warranties come from the manufacturer and we hand those to you at close. Call (888) 329-9414 with any warranty question.
Get a free chain link fence estimate in Enterprise

Call (888) 329-9414 to book a free on-site estimate for your chain link fence in Enterprise. A live person answers, day or night. We’ll measure the line, check caliche, confirm the permit and HOA picture, and hand you an itemized written quote with no surprises. Financing at 0% for 18 months is available, and projects over $10,000 take $1,000 off.
Written by the team at Groundwork Construction Co.












