







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Whitney, NV: What the Job Actually Involves
A chain link fence in Whitney, NV runs $3,500 – $9,000 for most residential lots, and the typical install takes one to three days once materials land and the permit clears. You’re buying galvanized or vinyl-coated mesh stretched over steel posts set in concrete, with gates, tension wire and top rail. For a standard 89122 backyard, most homeowners land in the middle of that range. Call (888) 329-9414 for a free on-site estimate and a written, line-item quote.
How We Build a Chain Link Fence, Stage by Stage

Chain link looks simple from the street. It isn’t. What separates a fence that stands straight for twenty years from one that sags in three desert summers is the prep work most crews skip. Here’s the sequence we run.
Stage 1: Site walk and layout (day 1, 1 – 2 hours)
We walk the property line with you, confirm where the fence runs, and mark every terminal post, corner and gate opening with paint or stakes. This is where you decide gate width and swing direction, and whether you’re tying into an existing fence or starting clean. Call 811 for utility locates before anyone digs. That step alone usually adds two to three business days of waiting, so it’s first for a reason.
Stage 2: Permitting with Clark County (2 – 4 weeks)
Whitney is unincorporated, so fence permits go through Clark County, not the City of Las Vegas. Height limits, setback from the property line and corner-lot sight triangles all get checked here. You decide the fence height and material now, because the permit is pulled against those specs. We handle the submittal and the inspection scheduling.
Stage 3: Demolition and hole digging (day 1 of install, 4 – 6 hours)
Old fence comes out first if there is one. Then we dig post holes to depth, which in Whitney’s caliche-heavy soil sometimes means a gas-powered auger rather than a shovel. You’ll see the holes spaced and string-lined before any concrete goes in. Post spacing and depth are set by fence height and wind load, and we don’t fudge them.
Stage 4: Posts, concrete, and cure (day 1 – 2)
Posts get set in concrete, plumbed and braced. Concrete needs to cure before you load the mesh, typically overnight. This is the stage where a homeowner can walk the line and check that every post is straight and the gate opening is the width you ordered.
Stage 5: Mesh, rails, gates and inspection (day 2 – 3)
Top rail, tension wire, mesh and gate hardware go on. We tension the mesh tight, hang the gate, and adjust the latch. Then the Clark County inspection happens, and you walk the finished fence with us before we call it done. Most Whitney jobs finish in a single visit after the concrete cures.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Chain link isn’t one product. The spec you pick drives both the price and how the fence looks in year ten.
- Galvanized vs. vinyl-coated mesh: Bare galvanized is the budget option and holds up fine in dry desert air, but it looks industrial. Vinyl-coated (green or black) costs roughly 15 – 25% more and reads softer against stucco and landscaping. For a Whitney backyard you’ll actually look at, coated is worth it.
- Gauge of wire: 11.5-gauge is the residential standard. 9-gauge is heavier, resists dogs and kids better, and adds cost. If you have a large dog or a pool, go heavier.
- Post and rail: Line posts, terminal posts and top rail size all scale with height. Taller fences need bigger posts and deeper holes, which is where a “cheap” quote usually cuts corners.
- Height: 4-foot, 5-foot and 6-foot are the common residential heights. Six-foot costs more in material and labor but is the usual choice for privacy and pets.
- Gates: Walk gates, double drive gates, and self-closing hardware. A wider drive gate needs heavier framing. Decide swing direction and latch style now, not after the posts are set.
- Top rail vs. tension wire only: A top rail stiffens the whole run and looks cleaner. Tension-wire-only is cheaper and common on large commercial runs, less so on a home.
Coated finishes and hardware from established manufacturers hold their color better than no-name imports. We source from suppliers we trust for exterior work, the same discipline we bring when we spec Belgard or Tremron hardscape products on a paving job.
What a Chain Link Fence Costs in Whitney, NV

Plan on $3,500 – $9,000 for a residential chain link fence in Whitney. A short 4-foot run on a flat lot sits at the low end. A 6-foot vinyl-coated fence with gates, on a lot with tough digging or a long perimeter, lands at the high end. Here’s what moves the number:
- Linear feet and height: More footage and taller fence mean more posts, mesh and concrete. This is the biggest single driver.
- Site conditions: Caliche, slopes, and rocky soil slow the digging and push labor up. Flat, soft ground keeps it down.
- Gates: Each gate is a separate line item. A double drive gate is the priciest piece on most jobs.
- Material grade: Galvanized at the low end, vinyl-coated and heavier gauge at the high end.
- Permit and removal: Clark County permitting and hauling off an old fence are real costs, quoted up front rather than tacked on later.
Our written estimate spells out footage, height, gauge, finish, gate count, permit fees and old-fence removal. What typically isn’t included: landscape repair beyond the fence line, moving irrigation or utility lines, and grading. We tell you that before you sign, not after. That’s the upfront-pricing, no-surprises standard we hold every job to.
See the difference
Before
After
Before
After
Before
AfterWhat Whitney Homes Specifically Do to a Chain Link Job
Whitney is a master-planned unincorporated community just southeast of Las Vegas, and that changes the paperwork: everything is permitted by Clark County rather than the city, and county inspectors are strict about property-line setbacks and sight triangles on corner lots. The housing stock is mostly 1980s- through 2000s-era single-family tract homes with stucco walls and tile roofs, plus some mobile home parks. A lot of these properties are putting up their first real fence, replacing a builder-grade original, or fencing a yard for a dog or pool for the first time. Desert wind is the constant here. Summer highs climb past 110°F, and high-wind and monsoon events work loose posts that weren’t set deep enough and buckle cheap gates. That’s the failure mode we see over and over. If the wider yard project is in play, a chain link run often goes in as part of a full Fence Installation in Whitney, and homeowners fencing off a side yard for a detached structure often pair it with ADU Site Prep & Utilities in Whitney so the lines and setbacks are handled together.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Whitney

The install itself takes one to three days, but the full timeline runs two to four weeks because Clark County permitting and utility locates come first. Concrete curing adds a day or two of waiting between setting posts and stretching mesh. Call (888) 329-9414 and we’ll give you a realistic schedule for your lot.
Yes. Whitney is unincorporated, so Clark County issues the fence permit, and height and setback rules get checked against your plot plan. We pull the permit and schedule the inspection for you. Call (888) 329-9414 to start with a free estimate.
Most of the time, yes. We call 811 to locate utilities before digging, which keeps post holes clear of gas, water and electrical lines. Irrigation lines right on the fence line are the main thing that needs rerouting. Call (888) 329-9414 and we’ll flag it on the site walk.
Most Whitney chain link fences land between $3,500 and $9,000, depending on footage, height, finish and gate count. Caliche and slope push the number up. Call (888) 329-9414 for an exact quote; estimates are free.
No. We quote fixed pricing in writing, and the number you approve is the number you pay. If we hit something unexpected like a buried line or failed old footings, we stop and talk to you before doing anything that adds cost. Every job is backed by our 730-Day Done Right Promise, and calls are answered by a live person 24/7. Call (888) 329-9414 to schedule.
Get a Free Chain Link Fence Estimate in Whitney
Call (888) 329-9414 to schedule a free on-site estimate for your chain link fence in Whitney, NV. We’ll walk the property line, confirm footage and height, talk through coated versus galvanized and gate placement, and hand you a written line-item quote with the permit and timeline in it. No pressure, no surprises. See our Fence Installation work and our full Whitney service area, and if the project grows to include a door or gate into a structure, we cover Door Installation in Whitney too.
Written by the team at Groundwork Construction Co.












