







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Spring Valley, NV: What to Expect
Concrete Driveways & Concrete Work in Spring Valley, NV usually runs $4,500 – $12,000 for a full driveway pour, with most single-family jobs landing between $6,800 and $9,400. A standard tear-out and replacement takes three to five working days from demo to the day you can park on it. Call (888) 329-9414 and a live person picks up, day or night, to set up a free on-site measurement and written quote.
Key Takeaways
- Full concrete driveway installation: $4,500 – $12,000 in Spring Valley.
- Replacement of an existing slab: $5,000 – $14,000, driven mostly by haul-off and base repair.
- Three to five days total, including cure time before you drive on it.
- Engineering and HOA factors on the west side push some jobs toward the high end.
- Every job is backed by the 730-Day Done Right Promise.
How we build a concrete driveway here, start to finish

Concrete is unforgiving. The pour is the easy part. What decides whether your driveway still looks right after five Mojave summers is everything that happens before the truck backs in. Here’s the sequence we run, and the decisions that land on you at each stage.
Stage 1: Site walk, layout and utility locate (day 1, about two hours). We measure the run, check slope away from the garage, and flag the grade issue that trips up a lot of west-side Spring Valley properties. Then we call in the utility locates before anyone touches a shovel. You decide the driveway width and whether to keep or widen the apron. A single-car run is typically 10 to 12 feet wide; a two-car run at 20 to 24 feet adds roughly $1,200 – $2,400 in concrete alone.
Stage 2: Demo and haul-off (day 1 into day 2). Old slab, footings, and any cracked approach come out. A 4-inch slab generates a lot of weight, and hauling it off is often the line item homeowners don’t expect. If the base underneath has settled or heaved, we dig further and re-compact. On expansive soil, skipping this step is how a new driveway fails in three years.
Stage 3: Grading, base and formwork (day 2 into day 3). We set a compacted aggregate base, then build forms to the finished grade. This is where drainage gets worked out. The drive has to shed water toward the street, not toward your garage or your neighbor’s fence line. You’ll decide at this point whether to add a scored joint pattern or a control-joint layout, and whether you want a decorative border.
Stage 4: Pour, finish and control joints (day 3). The pour itself is usually half a morning. Finish is where you pick the look: broom texture for grip, a light salt finish, or a deeper exposed aggregate. Control joints go in at roughly 10-foot intervals and at every inside corner, which is how you steer the shrinkage cracking that all concrete does.
Stage 5: Cure and walkthrough (days 3 through 7). Concrete reaches most of its working strength in a week. We keep traffic off it, then walk the job with you, check the grade, and hand over the warranty paperwork. Most Spring Valley jobs are done in a single visit after demo, and you’ll know the exact day the driveway is drivable before we ever break ground.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The concrete options you’ll actually choose between
- Standard broom-finished concrete. The workhorse. Rough grip texture, clean lines, the lowest cost inside the $4,500 – $12,000 range. It suits a tract home where the driveway reads as background, not a feature.
- Exposed aggregate. The top inch of paste is washed away to reveal the stone. Stronger visual texture and better slip resistance, and it hides the fine surface cracking that bothers some homeowners. Adds roughly 10 – 20% to the pour cost.
- Decorative borders or accent bands. A colored or contrasting perimeter runs $600 – $1,500 depending on length. Belgard and Tremron both make border and paver banding that pairs cleanly with a concrete field.
- Full paver-over-concrete look. If the HOA is strict about matching the streetscape, a paver accent apron using Techo-Bloc or Belgard units in front of the garage gives you the look of a paver driveway without the full paver budget.
- Fiber-reinforced vs. rebar. Mesh and fiber are common; #3 or #4 rebar on a grid is the more durable choice for a heavy vehicle load and worth the added cost on a long run.
- Thickness. 4 inches is the residential standard. If you park anything heavier than a pickup, or you’re pouring over repaired base, 5 to 6 inches pays for itself.
This is where a homeowner has to be honest about budget and priorities. A broom finish at the standard spec will hold up for decades. An exposed aggregate or bordered job costs more and looks custom. Neither is “better” until you decide what the driveway needs to do for the next 20 years.
What Concrete Driveways & Concrete Work costs in Spring Valley, NV

Concrete Driveways & Concrete Work in Spring Valley runs $4,500 – $12,000 for a new installation and $5,000 – $14,000 for a full replacement. Those are installed numbers, base prep and haul-off included. What pushes a job to the low or high end:
- Size and layout. A short single-car apron sits near the bottom of the range. A long two-car run with an extended parking pad climbs toward the top.
- Existing condition. A cracked, heaved slab that needs deep base repair and full haul-off adds cost over a clean, straightforward replacement.
- Base and soil prep. On the expansive soils near Rhodes Ranch, extra excavation and re-compaction are real line items. Skipping them is a false economy.
- Finish and decorative work. Exposed aggregate, borders and stamped accents move the number up from a plain broom finish.
- Drainage and grade corrections. If the site drains toward the house, we correct it, and that’s a line on the quote, not a surprise later.
Every estimate is written line-item, so you see exactly where the money goes: demo, haul-off, base, forms, pour, finish. Upfront pricing, no surprises – the number you see is the number you pay. Nothing gets added mid-job without a signed change order you approve first. If part of the scope falls under the wider Driveway & Pavers in Spring Valley work, we’ll say so in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Spring Valley homes specifically do to this job
Spring Valley sits right at the edge of the Mojave, and the concrete here has a harder life than pavement in almost any other market. Summer highs routinely top 110°F. Winter nights drop to freezing. That daily and seasonal swing drives thermal expansion and contraction, which is why our slab and flatwork calls are recurring needs rather than one-time fixes. Most of the housing here is 1990s and 2000s tract stock on slab-on-grade foundations, so demand skews toward mid-life renovation – not new construction.
The real local variable is soil. On the western edge and the slopes near Rhodes Ranch, expansive desert soils combine with summer monsoon downpours to move the ground and crack slabs. A driveway that looks fine on flat alluvial ground can spiderweb out here without proper base prep and control joint layout. We plan for it. Homeowners here often pair a new driveway with ADU Site Prep & Utilities in Spring Valley when they’re improving the same approach, and with Door Installation in Spring Valley when a new garage entry is part of the project.
HOA review matters too. Many of these gated subdivisions have architectural rules on driveway finish, width, and color, and a common-area matchup requirement. We read the CC&Rs before we pour, so what you get approved is what we build. For the broader range of hardscape work under our Driveway & Pavers service, we handle the same compliance review. And when you search for a contractor covering Spring Valley, our technicians – up to 12 years of experience on concrete flatwork – are who shows up.
Serving Spring Valley, NV – Our Local Coverage Area
We serve Spring Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Spring Valley

Three to five working days from demo to finish, plus about a week of cure before you drive on it. Most single-family jobs are done in one visit after the old slab comes out.
It depends on scope. A like-for-like replacement usually doesn’t; new approaches, widened aprons, or work affecting the right-of-way generally do. We check the requirement for your address before we quote, and we pull what’s needed.
In most cases, yes. A standard driveway pour sits clear of buried lines and out of the structure. When we hit something unexpected during demo, we stop and walk you through it before any extra work – no silent add-ons.
New installation runs $4,500 – $12,000; a full replacement runs $5,000 – $14,000. Size, base condition, finish, and drainage correction move the number. Call (888) 329-9414 – estimates are free and written line-item.
Every job is covered by our 730-Day Done Right Promise. If something isn’t right after the pour, we make it right. It’s one of the longest workmanship guarantees in residential construction, and it’s in writing.
Get a free estimate on your concrete driveway
Call (888) 329-9414 for a free on-site estimate on Concrete Driveways & Concrete Work in Spring Valley. A live person answers whenever you call, and we’ll book a time to measure your drive, check the base and grade, and hand you a written line-item quote. No pressure, no vague numbers. Then you decide.
Written by the team at Groundwork Construction Co.












