







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Enterprise, NV: What to Expect
Asphalt driveways & resurfacing in Enterprise, NV typically runs $3,500 to $9,000 for a full new asphalt driveway, or $250 to $700 for resurfacing and sealing an existing one. Most driveways go down in two to three days on a prepared base, with a short cure window before you park on them. Call (888) 329-9414 for a free on-site estimate and a written, line-item number.
How We Build and Resurface an Asphalt Driveway Here

Asphalt work on raw desert ground is a different job than patching a weathered driveway in an established neighborhood. Here’s the real sequence we run in Enterprise, stage by stage.
Stage 1: Site walk and layout (day 1, about an hour)
We measure the driveway run, check the slope away from the garage and foundation, and look at what’s under the surface. In Enterprise that last part matters more than anywhere: the caliche layer sits just below grade, and we need to know how deep it goes before we quote excavation. You decide the driveway width (a standard two-car run is 20 to 24 feet) and whether you want a turnaround or a widened apron.
Stage 2: Excavation and grading (day 1 into day 2)
On new pours we cut out to depth, and if caliche is thick we rip and recompact rather than fight it with a shallow cut that fails in a year. Grading sets a slope of roughly 2% away from the structure so monsoon runoff moves off the slab instead of pooling at the garage door. You’ll see the bare lot at this point and confirm drainage direction.
Stage 3: Base prep and compaction (day 2)
Crushed aggregate base goes in lifts of about 4 inches, compacted each pass. A proper asphalt driveway wants 4 to 6 inches of compacted base under 2 to 3 inches of asphalt. Skimp on the base and the desert heat and rare downpours will open cracks within two summers.
Stage 4: Paving (day 2 or 3, weather dependent)
Hot-mix asphalt goes down at 2 to 3 inches compacted for a residential driveway, rolled to density while it’s still workable. We schedule pours early morning in summer because mix placed above about 90°F ambient can cool too fast to compact properly. You decide edge treatment here: straight-cut edge, or a border that ties into landscaping.
Stage 5: Cure and seal (7 to 12 months later for the first seal)
Keep heavy vehicles off the new asphalt for about 48 to 72 hours and park in the same spot after that. The first seal coat waits until the asphalt has cured, usually the following spring. Resurfacing an existing asphalt driveway follows a shorter track: clean, patch cracks and depressions, then a seal coat or a thin overlay depending on condition.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the decisions on an asphalt driveway come down to how thick the base is, what surface treatment you want, and how the edges are finished. Here’s the honest trade-off on each.
- New hot-mix asphalt ($3,500 – $9,000): The value play for a full driveway. Warm and quiet underfoot, holds up well in desert sun if the base is right, and reseals far cheaper than replacing concrete. Downside: it needs a seal every two to three years to stay flexible in the heat.
- Resurfacing and seal coating ($250 – $700): The right call when the base is sound and you’re chasing cracks and oxidation rather than structure. Sealing extends the life of the asphalt noticeably, but it won’t fix a failed base or a sunken spot.
- Full-depth replacement ($5,000 – $14,000): When the existing asphalt is beyond resurfacing because the base has failed, you’re pulling it out and starting fresh. This is where caliche excavation can push the number toward the top end.
- Base thickness and compaction: The invisible decision with the biggest effect. A 6-inch compacted base costs more up front and is what we recommend on soft or caliche-heavy lots; a 4-inch base is fine on firm, well-drained ground.
- Edging and drainage: Straight-cut versus a bordered edge, plus how runoff is directed. On bare Enterprise lots we often tie the driveway into a swale or channel drain so monsoon water doesn’t undermine the edge.
If the driveway is part of a larger hardscape plan, we handle the wider scope through our Driveway & Pavers service, and paver borders are a common upgrade on asphalt.
What Asphalt Driveways & Resurfacing Costs in Enterprise, NV

New asphalt driveway paving in Enterprise runs $3,500 to $9,000. Resurfacing and seal coating is $250 to $700. Full-depth replacement lands between $5,000 and $14,000. Those ranges assume a typical residential driveway and a straightforward base. Here’s what moves the number:
- Size and length of the run: A long driveway out to a rural-parcel frontage costs materially more than a short city lot run.
- Caliche depth and excavation: The single biggest local variable. Thick caliche means ripping, recompacting, or over-excavating the base, which adds real machine time.
- Existing condition: A sound driveway that just needs resurfacing sits at the low end. Failed base or multiple sunken sections pushes toward replacement.
- Base depth and material grade: A thicker compacted base and higher-grade mix cost more but last longer in desert conditions.
- Drainage and grading scope: Adding swales, channel drains, or tie-ins to landscaping brings its own cost.
A written estimate from us lists excavation, base, asphalt thickness, compaction, and edge treatment as separate lines so you can see exactly where the money goes. What it won’t include: landscape restoration beyond the driveway footprint, and any grading tied to a separate site plan. Upfront pricing, no surprises – the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Homes Specifically Do to This Job
Enterprise is Las Vegas’s fast-growing southern-edge suburb, and the work here is dominated by new-build coordination on raw desert lots along the 89139 corridor rather than repair of aging driveways. Tract subdivisions, custom homes, and commercial infill keep pushing toward the Sloan/Jean conservation boundary and the McCullough Range foothills. That means most asphalt driveways we lay here start from bare Mojave ground, and caliche – the rock-hard calcium-carbonate layer just under the surface – is the biggest cost and schedule factor. Excavation crews rip and recompact or over-excavate the base, a step contractors from wetter, softer-soil markets never budget for. Housing stock is overwhelmingly recent, largely 1990s-to-2020s stucco-and-tile production homes, so a lot of our asphalt work is either a first driveway on a new parcel or a resurface on a young driveway that’s been baking in the sun. In the higher-end subdivisions around Southern Highlands and the Mountain’s Edge side, HOA rules on driveway width, edge material, and color come up before we pour, so confirm those early. Monsoon downpours, though rare, make grading and runoff control non-negotiable on bare lots. For a full-scope site plan, this pairs naturally with ADU Site Prep & Utilities in Enterprise, and homeowners often pair the driveway with a Chain Link Fence in Enterprise to define a new lot line.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Asphalt Driveways & Resurfacing in Enterprise

A new asphalt driveway typically takes two to three working days once the base is prepped, plus a short cure before you drive on it. Caliche excavation can add a day on tough lots. Call (888) 329-9414 for an exact timeline for your property.
Permit requirements depend on the scope and whether the driveway ties into public right-of-way or a grading plan, so we confirm this with you during the estimate. New construction and lot grading often trigger review; a simple resurface usually doesn’t. We walk you through it up front.
Yes, if the base is sound – resurfacing and sealing runs $250 to $700 and extends the life of the asphalt noticeably. If the base has failed or sections have sunk, replacement is the honest answer. We tell you which applies after we see it.
New asphalt paving runs $3,500 to $9,000, full replacement $5,000 to $14,000, and resurfacing $250 to $700. Size, caliche depth, and base thickness decide where you land. Call (888) 329-9414 for a free written estimate.
Every driveway we build is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Resurfacing and new asphalt both fall under it.
Get a Free Asphalt Driveway Estimate in Enterprise
Call (888) 329-9414 to set up a free on-site estimate for asphalt driveways & resurfacing in Enterprise. We’ll walk the lot, check the base and caliche, and hand you a written, line-item number with the base depth spelled out. Live person, 24/7. No voicemail, no waiting until Monday. We serve Enterprise and the surrounding valley through our Enterprise service area – see the fuller driveway scope on our Driveway & Pavers in Enterprise page.
Written by the team at Groundwork Construction Co.












