







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Boulder City, NV: What the Job Involves and What It Costs
A paver driveway in Boulder City typically runs $7,000 – $18,000 and takes three to five working days from demolition to the final sweep of joint sand. The work is a full excavation and rebuild, not a resurfacing: we remove the old slab or gravel, compact a graded base, set edge restraints, lay the pavers, and cut in the transitions at the street and garage apron. Call (888) 329-9414 and we’ll walk your driveway, measure it, and put a fixed number in writing before anything gets torn out.
How a Paver Driveway Gets Built, Day by Day

Most homeowners have never watched a driveway go in, so here’s the actual sequence we run, with the timing we hold ourselves to on a typical two-car Boulder City driveway.
Day 1: Demo, haul-off, and grading
We break out and haul away the existing surface, whether that’s cracked concrete, oil-stained asphalt, or decomposed gravel over caliche. Then we cut the subgrade to depth and rough-grade it. You’ll want to know where the trash bins and cars go for two or three days; that’s the main logistical decision on your end.
Days 1 – 2: Base prep and compaction
This is the part nobody sees and the part that decides whether a driveway lasts. We bring in crushed aggregate, spread it in lifts, and compact each lift with a plate compactor until it passes. On the older lots near the Historic District we sometimes hit compacted desert hardpan or old buried flatwork, which adds time to the excavation. A laser level check at the end of this stage sets the final slope away from the garage.
Day 2 or 3: Edge restraints and bedding course
We set a concrete or spiked plastic edge along both sides so the pavers can’t spread under tire load, then screed a thin bedding layer of coarse sand. Once that’s locked in, your material and pattern are final. If you’ve been going back and forth between two options, this is the deadline to decide.
Days 3 – 4: Laying and cutting
The crew lays field pavers, keeps the pattern running true, and wet-cuts the borders, the garage apron, and any curves. Cutting is the slow part on a driveway with a wide radius or a tight side yard. We set aside the cuts so they don’t land in the wheel path.
Day 5: Joint sand, compaction, and cleanup
We sweep polymeric or stabilized joint sand into the joints, run the plate compactor over the field one more time to seat everything, top off the sand, and wash down. You can park on it right away in most cases, though we’ll tell you the specific cure window for the sand you picked.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Pavers aren’t one product. These are the real forks in the road, and what each one costs you in money, maintenance, or both.
- Concrete pavers (the standard choice). Belgard and Tremron both make a solid interlocking paver, and this is what most Boulder City driveways get. They handle the desert’s thermal cycling well, a cracked unit swaps out individually, and they run in the middle of the price range.
- Clay brick pavers. Warmer look, genuinely long-lived, and a natural fit if your house already has brick or stone detailing. The trade-off is cost and a slightly larger crew-day count, because brick is heavier to lay.
- Permeable pavers. Open-graded joints that let water drain through the surface. Worth the premium if you have a low spot that puddles after monsoon storms, or if you’re adding hardscape that pushes you past your lot’s allowed impervious coverage.
- Color and finish. Through-color pavers hold their tone; surface-tinted ones fade faster under our UV load. Tumbled and textured finishes hide tire marks and dust better than a smooth face, which matters on a desert driveway.
- Pattern. Running bond is the quickest and cheapest to lay. Herringbone and basketweave cost more in labor but lock together better under turning tires and heavy vehicles.
- Border detail. A contrasting soldier course or a charcoal border is a modest upcharge and it’s what keeps the edge line crisp for years.
What Paver Driveways Cost in Boulder City, NV

Budget $7,000 – $18,000 for a full paver driveway installation here. A single-car apron in the low thousands sits at the bottom; a long, wide, curved, fully bordered driveway on a difficult site pushes toward the top. Five things move that number:
- Square footage and shape. Straight runs price out cheapest per square foot. Curves, tight side-yard access, and long borders add cutting and labor.
- What’s underneath. A clean gravel base is fast to prep. A thick, reinforced concrete slab to break out and haul, or buried debris on an old lot, adds a day and real disposal cost.
- Base depth. Driveways need more aggregate than a patio. If the subgrade is soft or poorly drained, we go deeper, and that’s aggregate plus compaction time.
- Paver grade and pattern. Standard concrete pavers in running bond is the value end. Clay brick, permeable systems, or a herringbone field land at the high end.
- Drainage and grading scope. If the driveway has to tie into a new swale, a channel drain, or a regraded apron, that’s additional work beyond laying pavers.
Your written estimate itemizes excavation and haul-off, aggregate base, compaction, edge restraints, bedding sand, pavers by brand and style, cutting, joint sand, and cleanup. What it typically doesn’t include is repairing whatever the old driveway was hiding, like a broken irrigation line or a settled garage slab. We flag those the moment we find them and price them before we proceed, so the number you approve is the number you pay. This is part of a full Driveway & Pavers in Boulder City scope when you’re also redoing walkways or a patio, and our Driveway & Pavers service covers the wider range of surfaces.
See the difference
Before
After
Before
After
Before
AfterWhat Boulder City Homes Specifically Do to This Job
Boulder City is boxed in. The Lake Mead National Recreation Area and the Boulder City Conservation Easement ring the town, so new construction almost never means greenfield lots. Nearly every paver driveway we build here is a replacement on an existing footprint in the 89005 and 89006 ZIP codes, and that changes the work. Much of the core housing is 1930s and 1940s Boulder Dam worker-era stock: small stucco and cinder-block bungalows on tight historic lots, often with block walls, original plumbing under the slab, and additions grafted onto a driveway apron that was never sized for a modern truck.
The Historic District downtown adds a layer you won’t hit in neighboring Henderson or Las Vegas: exterior work there can trigger design-review approval for historic appropriateness. A paver driveway in the district may need a material and color choice that reads as appropriate to the streetscape, so we sort that out with you before materials are ordered, not after the pallets land. On the construction side, summer highs over 100°F mean we schedule excavation and compaction early in the day and keep an eye on the bedding course, because intense sun and thermal cycling will find any weakness in a base that wasn’t compacted properly. That’s also why our crews’ up to 12 years of experience matters out here: the failure modes on desert driveways, from edge spread to sun-faded pavers, show up in predictable places.
Serving Boulder City, NV – Our Local Coverage Area
We serve Boulder City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Boulder City

Three to five working days for a typical Boulder City driveway, with heavier demo or a curved layout stretching toward a week. The base prep and compaction stages are where the schedule is most likely to move, so we give you a firm start date and keep you posted daily. Call (888) 329-9414 to get a timeline for your specific driveway.
Often yes, because a driveway rebuild can affect grading and drainage, and if you’re in the Historic District the exterior design may also need review. We pull the permits that apply and handle the inspections, so you’re not chasing the city yourself. Ask us at the estimate and we’ll tell you exactly what your address requires.
Yes, in the great majority of cases. We excavate to a controlled depth that clears the existing utilities and the garage slab, and we locate lines before we dig. If we do uncover something like a broken irrigation run under the old surface, we stop and show you before we touch it. Call (888) 329-9414 to have us look at your site.
Most projects land between $7,000 and $18,000, with size, base condition, paver grade and pattern, and drainage scope driving the spread. You get a written, line-item estimate before work starts, plus $1,000 off projects over $10,000 and 0% financing for 18 months if the number is large. Call (888) 329-9414 for a free on-site estimate.
Every paver driveway we build is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right, and that guarantee is in writing. That covers the workmanship on the base, laying, and finishing, backed by manufacturer warranties on the pavers themselves. Call (888) 329-9414 with questions about coverage before you commit.
Get a Free Paver Driveway Estimate in Boulder City
Call (888) 329-9414 for a free on-site estimate on paver driveways in Boulder City. A live person answers around the clock, and on the call we’ll set a time to measure your driveway, talk through material and pattern options, and hand you a written, fixed-price quote with no surprises. Homeowners often pair this with Door Installation in Boulder City or Cabinets & Countertops in Boulder City while the crew is already on site.
Written by the team at Groundwork Construction Co.












